Soleilwear Heated Vest & Precision Tools

The Soleilwear K112 is a men’s heated vest intended for outdoor work, hiking, fishing, skiing, cycling, camping, and everyday cold-weather use. Its nine heating zones distribute warmth around the collar, front, and back. Carbon-fiber heating elements are designed to warm up within seconds.

A one-button control provides three temperature settings: approximately 104°F (40°C), 122°F (50°C), and 140°F (60°C). The included 5V 12,000mAh power bank has an LED display that shows the remaining charge. Depending on the selected heat level, the manufacturer claims a continuous runtime of 5 to 11 hours.

The vest is made from nylon and polyester and is described as windproof and water-repellent. It is suitable for exposure to light rain but is not identified as fully waterproof. An elastic lower hem helps retain warmth, while two zippered side pockets provide storage. A separate inner pocket holds the power bank during use.

The vest can be machine washed after the battery has been removed. The package includes one heated vest, one power bank, a 30cm charging cable, and a user manual.

This men’s heated vest is designed to provide adjustable warmth during outdoor work, hiking, fishing, skiing, cycling, camping, and everyday cold-weather use. Nine heating zones distribute warmth around the collar, front, and back, while carbon-fiber heating elements are described as reaching operating temperature within seconds.

A single button switches between three heat settings: approximately 104°F (40°C), 122°F (50°C), and 140°F (60°C). The included 5V 12,000mAh power bank has a digital display for checking the remaining battery level. Depending on the selected temperature, the claimed continuous heating time ranges from 5 to 11 hours.

The nylon and polyester construction is described as windproof and water-repellent, making the vest suitable for light rain rather than confirmed waterproof use. An elastic hem helps retain warmth, while two zippered side pockets hold small personal items. A separate interior pocket keeps the battery secured during use.

The vest is machine washable after the power bank has been removed. The listed package contents include one heated vest, one power bank, a 30cm charging cable, and a user manual.

The Soleilwear K112 is a 5V portable power bank designed primarily for use with compatible Soleilwear heated vests. Its 12,000mAh capacity supplies power to heated clothing while remaining compact enough to carry in a vest battery pocket. Compatibility with heated apparel from other manufacturers is not assured and should be confirmed before use.

Two 5V/2.4A USB output ports allow the battery to power compatible heated clothing or charge USB devices such as smartphones, tablets, earbuds, and iPads. The power bank itself recharges through a 5V/2.1A USB-C input. A listed weight of 0.39 pounds makes it suitable for portable use.

The battery includes protection against overcharging, excessive temperature, and short circuits. UL and CE certifications are stated in the source, along with a one-year warranty. Although the Amazon title describes the power bank as TSA friendly, travelers should still follow current airline and security requirements for carrying lithium batteries.

The Soleilwear JD006 is a 52-piece precision screwdriver set for assembling and disassembling small electronic devices and other products with miniature fasteners. The kit includes 48 S2 steel bits, a rechargeable electric screwdriver, tweezers, a pry tool, and a USB-A to USB-C charging cable. Typical applications include phones, tablets, watches, cameras, drones, glasses, clocks, shavers, and remote controls.

The pen-shaped screwdriver has a curved aluminum-alloy body intended to provide a controlled grip. Forward and reverse buttons operate the driver at 200 rpm. Powered mode delivers 0.3 N·m of torque, while manual operation supports up to 3.5 N·m for initial loosening or final tightening.

The case uses a push-to-open mechanism and magnetic retention for the screwdriver and bits. A separate magnetization area can increase the magnetic hold of a selected bit. The built-in 350mAh lithium battery has a stated charging time of 45 minutes, with claimed performance of up to 900 screws or 180 minutes of continuous operation per charge.

Charging requires a USB-A to USB-C connection. The screwdriver is specifically described as incompatible with USB-C Power Delivery chargers.

The Soleilwear Y2 is a compact electric precision screwdriver intended for repairing laptops, smartphones, gaming consoles, cameras, drones, watches, keyboards, glasses, and other devices with small fasteners. It comes with 80 S2 steel bits rated at up to 60 HRC hardness, providing a broad selection for different precision screw types.

Five powered torque settings—0.15, 0.30, 0.45, 0.60, and 0.75 N·m—allow the output to be adjusted for delicate components and different fasteners. Manual mode supports torque up to 7 N·m when additional force is required. The 200 rpm motor offers forward and reverse rotation for powered tightening and loosening.

A built-in LED illuminates screws and components in dim or confined work areas. The pen-style aluminum-alloy body has an anti-slip gripping surface and is shaped for controlled handling during detailed repairs. The pop-up storage case keeps the screwdriver and bits organized while allowing one-handed access.

The rechargeable 500mAh battery charges through a USB-C port. The manufacturer claims that one charge can power the installation or removal of more than 600 screws, although actual performance will depend on torque settings and operating conditions.

The Soleilwear TY008 is a cordless electric cutter designed for straight and curved cuts through cardboard, paper, plastic, leather, carpet, and similar materials. It supports cardboard up to 1/4 inch thick but is not intended for soft fabrics. The self-sharpening blade design helps maintain the cutting edge during regular use.

Its motor operates at up to 320 rpm, while the rechargeable 2,000mAh battery provides a claimed continuous runtime of up to 50 minutes. The manufacturer lists an operating noise level of approximately 50 dB. A USB-C cable is included for charging.

A metal blade guard with an opening under 10 mm limits access to the cutting edge. Operation requires engaging the safety lock and switching on the tool; the lock can be released once the motor starts, so continuous pressure is not required. An integrated LED improves visibility around the cutting area in dim conditions.

The handle uses a curved, angled shape intended to provide a stable grip and reduce wrist strain during extended work. The package includes the electric cutter, one replacement blade, a disassembly tool, and a USB-C charging cable.